email public

PROTRAC: Radiometric point level detection

Radiometric point level detection operates with a radioactive source that emits focussed gamma radiation. The radiation is picked up by a detector on the opposite side of the vessel. When the gamma rays are blocked by the medium, the detector receives little or no radiation. The intensity changes of the incoming radiation are forwarded as signals by a relay.

The advantages

  • Maximum operational reliability even in the harshest environments
  • Measurement is unaffected by pressure, temperature and product corrosiveness
  • Measuring system can be installed on outside of vessel during ongoing production

Step by step to the right sensor

What would you like to measure?

{{selection.Description}}

Product catalog
Level
Switching
Vibration Capacitive Conductive Radar Radiation-based
Pressure
Interface
Density
Flow
Signal conditioning
Accessory and spare parts
Products
Function
PRO
Radiometrischer Sensor zur Grenzstanderfassung und Dichtemessung MINITRAC31

MINITRAC 31

Point detector

Show Product
PRO
POINTRAC 31

POINTRAC 31

Short rod detector

Show Product
VEGASOURCE 81

VEGASOURCE 81

Show Product
VEGASOURCE 82

VEGASOURCE 82

Show Product
VEGASOURCE 83

VEGASOURCE 83

Show Product
VEGASOURCE 84

VEGASOURCE 84

Show Product
VEGASOURCE 85

VEGASOURCE 85

Show Product
VEGASOURCE 86

VEGASOURCE 86

Show Product
SHLD1

SHLD1

Show Product
VEGASOURCE 31

VEGASOURCE 31

Show Product
VEGASOURCE 35

VEGASOURCE 35

Show Product
Liquids Solids

Function

Radiometric measurement is based on the gamma rays, i.e. radiation, emitted by an isotope. The sensor, located on the opposite side of the vessel, receives this radiation. The detector of the sensor converts the gamma radiation into signals, the number of which is recorded and evaluated.

Series

Detector = POINTRAC

Mounting

The radioactive source is mounted on one side of the container and the detector on the opposite side. For level detection, the sensor is usually mounted horizontally at the height of the desired limit level.

Connection

A three-core installation cable with PE conductor is required for power supply. The 4 ... 20 mA current output is connected with standard two-wire cable.

Setup

Due to the measuring principle itself, there is no linear relationship between the pulse rate and the level. For that reason, an adjustment must always be carried out.

Function

Radiometric measurement is based on the gamma rays, i.e. radiation, emitted by an isotope. The sensor, located on the opposite side of the vessel, receives this radiation. The detector of the sensor converts the gamma radiation into signals, the number of which is recorded and evaluated.

Series

Detector = POINTRAC

Mounting

The radioactive source is mounted on one side of the container and the detector on the opposite side. For level detection, the sensor is usually mounted horizontally at the height of the desired limit level.

Connection

A three-core installation cable with PE conductor is required for power supply. The 4 ... 20 mA current output is connected with standard two-wire cable.

Setup

Due to the measuring principle itself, there is no linear relationship between the pulse rate and the level. For that reason, an adjustment must always be carried out.



Close