Autoclave
Pressure monitoring and point level detection in the autoclave
|
|
Process data
Measuring task:
Pressure measurement and point level detection
Measuring point:
Autoclave
Medium:
Water, steam
Process temperature:
+30 … + 120 °C
Process pressure:
+2 … +3 bar
Special challenges:
Steam, condensate
Application
The aluminium cans are sterilised with steam at a temperature of 120 °C and a pressure of 3 bar in an autoclave. Then, while the cans are still in the autoclave, they are cooled down with water to a temperature between 35 °C and 40 °C. They are dried and further cooled before being stacked in the warehouse. To enable a safe, optimal autoclaving process, pressure and limit level are measured.
Your benefit
Safe
Approved materials according to FDA and EC 1935/2004
Cost effective
Maintenance-free operation
User friendly
Compact design facilitates easy installation
Recommended products
VEGASWING 51
Vibrating level switch for detecting the water level in the autoclave
- Exact, reliable measurement through product-independent switching point
- Minimal time and cost expenditure thanks to simple setup without medium
- Optimal control of the inlet and outlet valves
Measuring range - Distance
-
Process temperature
-40 ... 150 °C
Process pressure
-1 ... 64 bar
VEGABAR 38
Pressure transmitter for monitoring the steam pressure in the autoclave
- Robust measuring cell is resistant to sterilisation processes
- Reliable measurement, unaffected by steam and condensate
- Precise process control thanks to fast response time
Measuring range - Pressure
-1 ... 60 bar
Process temperature
-40 ... 130 °C
Accuracy
0.3 %
Close