Crusher
Level measurement and point level detection in rock crushers
Level measurement and point level detection in rock crushers
Process data
Measuring task:
Level measurement and point level detection
Measuring point:
Crusher
Measuring range up to:
5 m
Medium:
Stones
Process temperature:
-40 … +50 °C
Process pressure:
0 … 0 bar
Special challenges:
Strong noise and dust generation, extreme abrasion
Application
The large boulders are extracted from the solid bedrock with blasting. This very first stage in the process is needed to enable these very large rocks to be crushed by smaller, secondary jaw and roller crushers, which create the smaller sizes for screening to produce the basic building materials like gravel, grit or sand. To enable efficient, continuous operation and keep wear on the crusher as low as possible, level measurement and point level detection are required.
Your benefit
Reliable
Reliable measurement ensured even in noisy environments
Cost effective
Uninterrupted operation thanks to optimal process feed
User friendly
Simple installation and setup
Recommended products
VEGAPULS 6X
Non-contact level measurement with radar in rock crushers
- Reliable measurement and control, independent of extreme dust generation and weather conditions
- Maximum operational reliability through noise insensitivity
- Maintenance-free non-contact measuring method
Measuring range - Distance
120 m
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
VEGAMIP 61
Microwave barrier for point level detection in rock crushers
- Maintenance-free non-contact measuring method
- High measurement certainty despite dirt and buildup
- Even external measurement via solid plastic or ceramic window
Measuring range - Distance
100 m
Process temperature
-40 ... 80 °C
Process pressure
-1 ... 4 bar
Close